Men’s Waterproof Shorts

Men’s Waterproof Breathable Outdoor Shorts with Drawstring Waist

Wholesale and private label

Overview

These are men’s outdoor shorts with a drawstring waist, a waterproof shell and a breathable construction. They are made for the activities where ordinary shorts fail: hiking in wet grass, cycling through a shower, fishing, camping and travelling in changeable weather. The outside of the fabric keeps water and mud on the surface rather than letting them soak through, while the construction allows moisture from the body to escape, so the wearer does not end up damp from the inside on a long walk. The drawstring waist adjusts in seconds and holds without a belt, and the cut is designed for movement rather than for sitting at a desk. The shorts are produced as a stock item and as a private-label piece, so the shell, the waterproof rating, the colour and the trims can all be set to your specification. Sizes run [S–XXL], and can be graded to your own size chart. MOQ is 100 pieces per colourway.

Product specification

Shell: waterproof, breathable fabric, [rating to be confirmed on the sample].

Finish: water-repellent treatment so rain beads and runs off.

Waist: elasticated with a drawstring, adjustable without a belt.

Seams: [taped or sealed] at the load points, confirmed on the sample.

Pockets: [zipped side pockets], confirmed on the sample.

Fit: [regular outdoor fit], room to move.

Colour: dark grey, slate and teal-blue as photographed, or matched to your reference.

Sizes: [S–XXL], graded to your size chart.

MOQ: 100 pieces per colourway, mixed sizes accepted.

Sample: 7–10 working days per round.

Bulk lead time: 25–40 days after sample approval and deposit.

Care: machine wash cold, do not bleach, do not iron the coated fabric, hang dry.

Quality control: inline and final inspection, waterproof and breathability check, drawstring pull test, needle detection.

Why buyers choose this style

Outdoor shorts are bought for a specific reason: the customer does not want to stop what they are doing because of the weather. That makes them a practical, repeat purchase rather than a trend item, and it means the same shorts are bought by hikers, cyclists, fishermen, campers and travellers who want one pair that handles a wet day.

The drawstring waist is what makes them easy to sell online. A fixed waistband has to be tried on; a drawstring can be adjusted at home, which means customers accept a slightly looser fit and the return rate falls. That detail alone changes the commercial performance of a pair of shorts.

The waterproof and breathable combination is the third selling point. Waterproof shorts that do not breathe become uncomfortable within an hour, which is why the rating is confirmed with the buyer: a lighter option suits commuting and travel, while a higher rating suits hiking and longer exposure. For the buyer, the numbers are straightforward: 100-piece MOQ, 7–10 day sampling and 25–40 day bulk lead time, with mixed sizes in one order.

Two things make a pair of shorts waterproof. The first is the fabric itself: a coated or laminated shell blocks water from the outside. The second is the construction: water finds its way through the stitch holes in a seam, so the critical seams are taped or sealed, and any pocket opening is protected.

Breathability is the other half of the equation, and it is what separates a pair of shorts that can be worn for a full day from one that has to be taken off after an hour. A breathable fabric lets moisture vapour from the body pass through while still blocking liquid water, which is why the rating is always quoted as two numbers — a waterproof column and a breathability figure. Both are confirmed on the sample and tested before bulk.

In practice the shorts also dry quickly. A water-repellent finish makes rain bead on the surface and run off, and once the shorts are taken off they dry in a fraction of the time of cotton, which matters on a multi-day trip.

Drawstring waist and adjustable fit

The waistband is elasticated and closed with a drawstring, so the fit can be adjusted without a belt. The elastic sits inside the waistband channel rather than being exposed, so it does not dig in or show under a top, and it is anchored at the side seams so it cannot roll or twist inside the channel after washing — the most common complaint about drawstring shorts, and one that is solved in construction rather than in price.

The drawstring is matched to the fabric in tone, exits at the centre front, and the ends are finished with heat-sealed tips or small cord locks, depending on the look you want. The cord is kept to a practical length: long enough to adjust comfortably, short enough that it does not trail. Where the market requires it, the drawstring can be made with a stretch cord or fully enclosed, which is the safer option for some buyers.

The waistband depth and the elastic width are confirmed on the sample. A deeper waistband is more comfortable on active shorts, while a narrower band gives a slimmer look.

Outdoor construction: pockets, seams and movement

The construction is designed around wet weather and movement. Pocket openings are made with zips or covered flaps so water and sand do not get in, and the pocket bags are anchored at the top so a phone or a set of keys does not drag the shorts out of shape. The seams at the crotch, the seat and the side are reinforced, because those are the points that take the load when walking uphill, climbing over a stile or squatting down.

The crotch is cut with a gusset so the shorts do not pull or split when the wearer steps up onto a rock or a bike, and the leg openings are cut wide enough to move freely without catching on the knee. The hem is finished so it does not fray even with heavy use, and the fabric is checked for tear strength, since a lightweight outdoor shell has less material to resist a snag.

Fit and sizing

Sizing is based on waist relaxed, waist stretched, hip, thigh, inseam and leg opening, measured flat without stretching, with both centimetres and inches printed on the size guide. Reference sizes [S–XXL], confirmed on the order. Because the waist is adjustable, the extended measurement is shown next to the relaxed measurement so the customer can see the full range of the size, and because the shorts are worn for activity, the hip and thigh should allow for movement rather than fitting tightly.

Colour and finishing

The photographed sample is a dark palette — dark grey, slate and teal-blue — which is the easiest group of colours to sell in outdoor wear because it hides dirt and water marks better than a light colour. Colour is matched to your Pantone reference and checked under D65 light before cutting, and because the shell is coated, the shade is re-checked after finishing. Where a range needs variety, the same pattern can be produced in olive, black, navy or a seasonal shade.

Customization

Colours: dark grey, slate and teal-blue as shown, or matched to your Pantone reference.

Shell: waterproof and breathable fabric, with the rating confirmed on the sample.

Waist: drawstring type, cord ends and elastic width.

Pockets: zipped or flap pockets, in the layout you choose.

Details: reflective print, contrast zip, taped seams and an optional inner brief or mesh lining.

Branding: woven labels, care labels, hangtags, barcodes and patches.

Sizes: [S–XXL], or graded to your own chart.

Sampling and production timeline

1. Inquiry. Send a photo, a sketch or a tech pack.
2. Fabric. Confirm the shell, the coating and the ratings, 3–7 days.
3. Pattern. Fit, waistband, gusset, pockets and hem, 2–3 days.
4. Sample. First sample with taped seams and drawstring waist, 7–10 working days per round.
5. Approval. Your sign-off on fit, colours, waterproofing and trims.
6. Bulk. Production, 25–40 days after approval and deposit.
7. Shipment. Final inspection and packing, then sea, air or express.

Most outdoor styles are approved in two rounds: the first sample confirms the fit, the gusset and the pockets, and the second confirms the shell, the ratings, the colours and the trims.

Quality control, stage by stage

• Shell checked on arrival, including waterproof rating, coating and shade.
• Waist, hip, thigh and leg opening measured against the specification.
• Drawstring pull test and elastic recovery test on every size.
• Seam taping and pocket construction checked.
• Waterproof and breathability tests on the sample and in bulk.
• Measurement, colour and label verification, then needle detection and final inspection.

Minimum order quantity

The MOQ is 100 pieces per colourway, and mixed sizes within one colour are accepted, so a 100-piece order can cover a full size run. A higher waterproof rating, a special coating or a mesh lining may require a higher quantity, confirmed at quotation stage.

What we need from you

• A clear photo, a sketch, a sample from another market or a full tech pack.
• The waterproof and breathability ratings you need.
• Your size range and grading, or we can develop one for approval.
• Pocket layout, drawstring type and hem finish.
• Whether an inner brief or mesh lining is required.
• Colour references, with Pantone numbers, plus label and packaging requirements.

FAQ

What is the MOQ? 100 pieces per colourway, mixed sizes accepted.

How long does sampling take? 7–10 working days per round.

How long is bulk production? 25–40 days after sample approval and deposit.

Are the shorts waterproof? Yes, the shell is waterproof with protected seams. The rating is confirmed with the buyer.

Are they breathable? Yes. The fabric lets moisture vapour escape, and the breathability figure is confirmed on the sample.

Is the waist adjustable? Yes. It is elasticated with a drawstring, and the elastic is anchored so it does not twist in the wash.

Are there pockets? Zipped or flap pockets can be produced; the layout is confirmed on the sample.

详情