{{{cp11}}}
Dog Dust-Proof Windbreaker Coat
Lightweight dog windbreaker with a full-length zip and an attached hood, made for cool days and changeable weather. The water-repellent shell blocks wind and keeps dust, dirt and light rain on the surface, so a muddy splash wipes off with a damp cloth instead of soaking in. The full zip opens the jacket flat, which makes dressing quick and easy, especially for older dogs and dogs that dislike being pulled into a coat. The hood protects the head and neck in the wind, and the opening adjusts with a drawstring and cord lock. Short, heat-sealed cord ends stay tidy and out of the way, and the jacket folds small for travel. Sizes XS–3XL. MOQ 100 pieces, sampling 7–10 working days, bulk 25–40 days.
Dog Windbreaker with Zip and Hood
Wholesale and private label
Overview
This is a lightweight dog windbreaker made for cool days, with a full-length zip and an attached hood. The shell is a water-repellent polyester that blocks wind and keeps dust, dirt and light rain on the surface, where it wipes off with a damp cloth after a walk. The zip opens the jacket flat, so it goes on quickly and comes off just as easily — a real advantage with older dogs, nervous dogs and dogs with thick coats. The hood covers the back of the head and the neck when the wind picks up, and the opening is adjusted with a drawstring and a cord lock for a close, comfortable fit. The jacket is light, dries fast and folds into a small space, so it is easy to keep in a bag or in the car. Sizes run XS to 3XL, with mixed sizes accepted in one order. MOQ is 100 pieces per colourway.
Product specification
Shell: water-repellent polyester with a smooth, dust-releasing surface.
Closure: full-length zip with an internal guard and a covered top end.
Hood: attached hood with an adjustable drawstring and cord lock.
Cord ends: short and heat-sealed, with an elasticated cord option.
Sizes: XS to 3XL, by back length, chest girth and neck girth.
MOQ: 100 pieces per colourway, mixed sizes accepted.
Sample: 7–10 working days per round.
Bulk lead time: 25–40 days after sample approval and deposit.
Care: wipe clean with a damp cloth; hand wash or gentle cycle, air dry.
Quality control: inline and final inspection, zip and drawcord check, water-repellency test.
Why buyers choose this style
A windbreaker is the easiest dog jacket to sell in spring and autumn, because it does exactly what owners want: it blocks the wind and keeps the dog clean. It is the jacket for a cool morning walk, a dusty road, a wet park or a car journey, and it is light enough to carry when the weather changes during the day.
The zip is a strong selling point in reviews. Owners who have struggled to pull a coat over a dog’s head choose a jacket that opens flat, and the difference is obvious with older dogs and with dogs that dislike having anything put over their head.
For the buyer, the style fits a normal buying calendar: 100-piece MOQ, 7–10 day sampling and 25–40 day bulk lead time, with mixed sizes in one order. It is easy to add to a range that already includes fleece and padded styles.
Wind, dust and dirt protection
The shell is a water-repellent polyester. It blocks wind, resists light rain, and keeps dust and dirt on the surface of the fabric, so a muddy splash wipes off with a damp cloth instead of soaking into the cloth. That makes the jacket genuinely low-maintenance: it stays clean-looking after a walk and rarely needs a full wash.
The smooth surface also releases hair and dust rather than holding it, so the jacket brushes down quickly and keeps its colour for longer. The water-repellent finish keeps damp grass and light rain away from the coat, which is what most owners need on a normal walk.
The full zip
The jacket closes with a full-length zip, which opens the coat flat for dressing. The zip runs smoothly, holds the opening in shape and is easy to wipe clean. An internal guard behind the teeth keeps the zip clear of the coat when the jacket is closed, and a covered top end keeps the slider comfortable at the neck.
For the buyer, the zip is also a quality signal. It is the part of a dog jacket that gets used most often, so it is checked on every garment during inspection.
The hood and the drawstring
The hood is attached and shaped to cover the back of the head and the neck while leaving the eyes clear. It protects the head and ears when the dog turns into the wind, and it can be worn up or folded back.
The hood opening is adjusted with a drawstring and a cord lock, so it fits a narrow head closely and loosens easily for a wider head or for a dog wearing a collar underneath. The cord ends are kept short and heat-sealed so they stay tidy and out of the way, and an elasticated cord can be specified as an alternative for dogs that run through brush.
Lightweight and easy to pack
The jacket is light, dries quickly after a wet walk, and folds into a small space. It is easy to keep in a bag, in the car, or by the door for a quick walk, and it is comfortable enough for the dog to wear for a full day.
Fit and sizing
Sizing is based on three measurements: back length from the base of the neck to the base of the tail, chest girth at the widest point behind the front legs, and neck girth. Chest girth is the most important, because the jacket should sit comfortably around the chest and allow the dog to walk, sit and lie down freely.
Reference sizes are XS (back 20 cm), S (back 25 cm), M (back 30 cm), L (back 35 cm), XL (back 40 cm), 2XL (back 45 cm) and 3XL (back 50 cm), with chest ranges developed to your own chart. Both centimetres and inches are printed on the size guide.
Customization
Colours: Pantone matching, solid dyeing and colour blocking.
Prints: digital print and reflective print.
Details: contrast zip, contrast hood, branded zip puller.
Labels and packaging: woven labels, care labels, hangtags, barcodes and patches, plus poly bags, header cards or retail boxes with carton markings.
Sampling and production timeline
- Inquiry. Send a photo, a sketch or a tech pack.
- Fabric. Confirm the shell, the coating and the colour, 3–7 days.
- Pattern. Fit, hood shape and leg openings, 2–3 days.
- Sample. First sample, 7–10 working days per round.
- Approval. Your sign-off on fit, shell, hood and zip.
- Bulk. Production, 25–40 days after approval and deposit.
- Shipment. Final inspection and packing, then sea, air or express.
Most styles are approved in two rounds: the first sample confirms the fit and the hood shape, the second confirms the shell, the colour and the trims.
Quality control, stage by stage
- Shell checked on arrival, including water repellency and shade.
- Hood shape, leg openings and seam alignment checked during sewing.
- Zip function checked on every garment.
- Drawcord length and cord-end sealing checked.
- Measurement, colour and label verification.
- Needle detection and final inspection before packing.
Minimum order quantity
The MOQ is 100 pieces per colourway, and mixed sizes within one colour are accepted, so a 100-piece order can cover a full size run. Custom prints, special coating levels or special trims may require a higher quantity, confirmed at quotation stage.
What we need from you
- A clear photo, a sketch, a sample from another market or a full tech pack.
- Your size chart, or we can develop one and send it for approval.
- Colour and print references, with Pantone numbers.
- Zip, cord lock and hood specification.
- Label, hangtag and packaging requirements, plus barcode details.
FAQ
What is the MOQ? 100 pieces per colourway, mixed sizes accepted.
How long does sampling take? 7–10 working days per round.
How long is bulk production? 25–40 days after sample approval and deposit.
What weather is it made for? Cool days, wind, damp grass and light rain.
Does the hood adjust? Yes, with a drawstring and cord lock, and an elasticated cord is also available.
Can the colour be customized? Yes, matched to Pantone and confirmed on the sample.
Leave a Reply
Want to join the discussion?Feel free to contribute!