Men’s Basic Sweatshirt

Men’s Basic Hooded Sweatshirt with Double-Layer Hood and Kangaroo Pocket

Wholesale and private label

Overview

This is a men’s basic hooded sweatshirt made for early spring and autumn, and for layering under a coat in winter. It has a double-layer hood, which gives the hood structure without adding a fleece lining, and a kangaroo pocket at the front that is deep enough to put both hands in and to carry a phone, keys or a card holder. The fabric is a plain knit rather than a brushed fleece, so the sweatshirt stays breathable when it is worn indoors and layers smoothly under a jacket without adding bulk at the shoulder. The surface is open to branding: print and embroidery can both be applied to the chest, the back or the sleeve without changing the pattern. Sizes run [S–XXL], and can be graded to your own size chart. MOQ is 100 pieces per colourway.

Product specification

Fabric: plain knit sweatshirt fabric, no fleece lining, [composition to be confirmed].

Hood: double-layer, structured, worn up or down.

Pocket: kangaroo pocket at the front, reinforced at the corners.

Fit: regular, neither slim nor oversized.

Trims: ribbed cuffs and hem, [confirmed on the sample].

Decoration: print or embroidery on the chest, back or sleeve.

Colour: [to be confirmed], matched to your Pantone reference.

Sizes: [S–XXL], graded to your size chart.

MOQ: 100 pieces per colourway, mixed sizes accepted.

Sample: 7–10 working days per round.

Bulk lead time: 25–40 days after sample approval and deposit.

Care: wash inside out, dry flat or tumble dry low, do not bleach.

Quality control: inline and final inspection, pocket and hood strength check, rib recovery check, needle detection.

Why buyers choose this style

A plain hoodie is one of the highest-turn items in menswear, because it is bought every autumn, it is worn in several ways, and it does not depend on a trend. The same garment is worn by students every day, by office workers on casual days and by older customers as a layer under a coat, which is why the style repeats season after season and why it is a safe use of inventory.

The details on this version are what make it worth stocking next to a plain sweatshirt. The double-layer hood looks fuller and keeps its shape, the kangaroo pocket is a feature customers look for by name, and the fabric is light enough to wear indoors and under a jacket. Together they turn a basic hoodie into a product that can be sold at a slightly higher price without complicating production.

For the buyer, the numbers are straightforward: 100-piece MOQ, 7–10 day sampling and 25–40 day bulk lead time, with mixed sizes in one order. The style can be produced as a plain stock item or as a private-label piece with your own print, embroidery, label and packaging.

The double-layer hood

The hood is made from two layers of the same fabric rather than a single layer, which is the detail that changes how the garment looks and wears. A single-layer hood collapses and shows the shape of the neck seam from the outside; a double-layer hood stands up, holds its shape when it is down, and looks fuller on the shoulders, which is what customers notice first in a photograph.

Two layers also improve the way the hood sits when it is worn up. The inner layer is the fabric that touches the head, so the hood feels smooth and does not cling, and the outer layer keeps the shape instead of folding along the seam. Because the hood is built from the same plain knit as the body rather than a fleece, it adds structure without adding warmth or weight, which is exactly what a three-season sweatshirt needs.

The hood is attached with a flat seam so it does not rub at the back of the neck, and the front edge is finished with a band so the opening keeps its shape after repeated use. A drawcord can be added if your market wants one, and the cord is then kept short with finished ends; the same hood can also be produced without a drawcord, which is the choice some buyers make for children and for markets with cord safety rules.

The kangaroo pocket

The pocket is the classic front pouch: one opening across the belly with two hand openings, deep enough to put both hands in and large enough for a phone, a card holder or keys. It is the feature that customers ask for by name in a hoodie, and it is the reason the style sells as a practical everyday piece rather than only as a fashion item.

On a knit sweatshirt, the pocket has to be built so that it does not sag or pull the body out of shape. The pocket is sewn on at the sides and the bottom, with bar tacks at the corners where the hands go in and out, so the opening does not tear with daily use. The pocket bag is anchored at the top so the weight of a phone does not drag the front of the sweatshirt out of line, and the fabric weight is chosen so the pocket holds its shape after washing rather than stretching down.

The pocket is also a natural place for decoration: a small print or an embroidered logo can be placed on the pocket or just above it, which is a common way for a brand to be visible without covering the whole chest.

No fleece: a three-season sweatshirt

The fabric is a plain knit without a brushed fleece lining. That choice is deliberate and it is the reason the sweatshirt works in more than one season. In early spring and autumn it is warm enough on its own, and because it is not brushed it does not trap heat indoors; in winter it becomes a base layer under a coat or a jacket, adding warmth without adding bulk at the shoulder or the sleeve.

A no-fleece sweatshirt also dries faster and packs smaller than a fleece version, which matters for travel and for customers who want a light layer in a bag. The fabric is chosen for hand feel, colour depth and print quality, and it is pre-shrunk or washed before cutting so the garment keeps its size after the first wash.

Two quality points are controlled before bulk: pilling, which appears at the cuffs, under the arms and where a bag rubs against the side, and shrinkage, which is tested after washing.

Print and embroidery customization

The sweatshirt is designed as a branding base. Printing can be applied to the chest, the back, the sleeve or the pocket, in a small placed logo, a chest print or a full back graphic. Embroidery can be placed on the chest, the sleeve or above the pocket, and the two methods can be combined on the same garment.

Each method is confirmed on a sample. Printing on a knit is developed for stretch and wash resistance, so the pattern does not crack when the sweatshirt is pulled over the head or washed. Embroidery needs a stabiliser behind the panel so the stitches do not pucker the knit, and the stitch count is controlled so the fabric keeps its softness. Thread colours are matched to your reference and a stitch-out is approved before production.

Because the pocket and the hood are part of the same pattern, the artwork can be developed so that the print or embroidery sits correctly on the body and is not cut off at the pocket edge.

Fit and sizing

The fit is regular through the body, the shoulder and the sleeve. Chest width, body length, shoulder width and sleeve length are measured flat without stretching, and grading is developed to your own size chart. Reference sizes [S–XXL], confirmed on the order, with both centimetres and inches printed on the size guide.

Customization

Colours: matched to your Pantone reference.

Fabric: plain knit, no fleece, in the weight you choose.

Hood: double-layer as standard; drawcord optional.

Pocket: kangaroo pocket as standard; size and placement confirmed on the sample.

Decoration: print, embroidery or a combination, on the chest, back, sleeve or pocket.

Labels and packaging: woven labels, care labels, hangtags, barcodes and patches, plus poly bags, header cards or retail boxes with carton markings.

Sizes: [S–XXL], or graded to your own chart.

Sampling and production timeline

1. Inquiry. Send a photo, a sketch or a tech pack.
2. Fabric. Confirm the fabric, the weight and the colour, 3–7 days.
3. Pattern. Fit, hood shape, pocket and trims, 2–3 days.
4. Sample. First sample with hood, pocket and decoration, 7–10 working days per round.
5. Approval. Your sign-off on fit, fabric, colour and decoration.
6. Bulk. Production, 25–40 days after approval and deposit.
7. Shipment. Final inspection and packing, then sea, air or express.

Most hoodie styles are approved in two rounds: the first sample confirms the fit, the hood and the pocket, and the second confirms the fabric, the colour and the print or embroidery.

Quality control, stage by stage

• Fabric checked on arrival, including weight, shade and hand feel.
• Chest, body length, sleeve and hood measured during sewing.
• Pocket openings bar-tacked and pull-tested.
• Hood shape and hood seam checked on the finished garment.
• Rib recovery checked at the cuffs and hem.
• Pilling, shrinkage and colourfastness tested; print or embroidery checked.
• Measurement, colour and label verification, then needle detection and final inspection.

Minimum order quantity

The MOQ is 100 pieces per colourway, and mixed sizes within one colour are accepted, so a 100-piece order can cover a full size run. Custom dyeing, a special fabric or multi-colour decoration may require a higher quantity, confirmed at quotation stage.

What we need from you

• A clear photo, a sketch, a sample from another market or a full tech pack.
• Fabric composition and the weight you want.
• Your size range and grading, or we can develop one for approval.
• Colour references, with Pantone numbers.
• Decoration: print, embroidery or both, with artwork in vector or high-resolution format.
• Whether a hood drawcord is required, plus label and packaging requirements.

FAQ

What is the MOQ? 100 pieces per colourway, mixed sizes accepted.

How long does sampling take? 7–10 working days per round.

How long is bulk production? 25–40 days after sample approval and deposit.

Is the hood lined with fleece? No. The hood is double-layer in the same fabric as the body, and the sweatshirt has no fleece lining.

Is the pocket usable? Yes. The kangaroo pocket is deep enough for both hands, a phone or keys.

Can print and embroidery both be added? Yes. They can be used separately or combined on the same garment.

Can it be worn in winter? Yes. It is designed for early spring and autumn on its own, and as a base layer under a coat in winter.

Have a tech pack or a photo? Send it over.

We will come back with a sample plan, the MOQ and a quotation for your market. For repeat orders we keep your fabric, colour and artwork on record, so the next order starts from the approved sample.