Dog UV Protection Set

Dog UV Protection Shirt and Hat Set

Wholesale and private label

Overview

This is a summer set for dogs: a UV protection shirt and a matching hat, designed to keep the sun off the coat and the head while allowing air to move around the body. The shirt is held in place by shoulder straps rather than a full chest band, which reduces the fabric that sits against the dog’s chest and keeps the set cooler to wear. Breathable panels and ventilation openings let heat escape, and a pocket on the back holds a gel ice pack, which helps the dog stay comfortable in high summer temperatures. The hat is shaped to cover the head and the back of the neck, with openings on both sides for the ears and a drawstring underneath to stop the hat sliding off. The set is light, quick to dry and easy to pack, and it is designed for walks, travel, beach days and any owner who wants extra sun protection for a short-haired or light-coloured dog. Sizes run XS to 3XL, by back length, chest girth and neck girth. MOQ is 100 pieces per colourway.

Product specification

Fabric: lightweight, stretchy polyester/spandex with a UV-blocking finish.

Ventilation: mesh panels and ventilation openings for airflow.

Fit: shoulder straps hold the shirt in place without a full chest band.

Back pocket: sized to hold a gel ice pack.

Hat: ear openings on both sides, with a drawstring and cord lock underneath.

Sizes: XS to 3XL, by back length, chest girth and neck girth.

Colours: shown in charcoal/grey, lavender and green; matched to your Pantone reference.

MOQ: 100 pieces per colourway, mixed sizes accepted.

Sample: 7–10 working days per round.

Bulk lead time: 25–40 days after sample approval and deposit.

Care: hand wash or gentle cycle, air dry, do not bleach, do not iron the coated fabric.

Quality control: inline and final inspection, UPF test where required, drawcord and strap check, needle detection.

Why buyers choose this style

Summer pet products sell on two things: cooling and convenience. This set delivers both in one package. The shirt blocks the sun and the ice pack pocket gives owners a practical way to help their dog stay comfortable, while the hat solves the problem that most sun shirts leave open: the head and ears. It is also a strong impulse-buy item, because owners who buy a cooling mat or a summer harness will add a UV shirt and hat set to the same order.

The set is easy to merchandise as a two-piece product, as a single shirt, or as an add-on to a summer range, and the colour options photographed — charcoal, lavender and green — give a buyer three different shopper profiles from one pattern. It also packs flat, ships light, and photographs well on white or outdoor backgrounds, which matters for e-commerce.

For the buyer, the numbers are straightforward: 100-piece MOQ, 7–10 day sampling and 25–40 day bulk lead time, with mixed sizes in one order.

UV protection: what the fabric does

The shirt is made from a lightweight stretch fabric with a UV-blocking finish, so it blocks a large part of the sun’s UV radiation before it reaches the coat and the skin. Where the buyer’s market requires a specific claim, the fabric can be tested to the relevant standard — such as AS/NZS 4399, AATCC 183 or EN 13758 — and the UPF rating printed on the product page or the label only after the test result is confirmed.

Three design points make the protection practical rather than theoretical. First, the shirt covers the back and the upper body, which are the areas most exposed when a dog walks in strong sun. Second, the fabric is light enough that the dog does not overheat while wearing it, because a sun shirt that traps heat does more harm than good. Third, the shoulder-strap construction reduces the amount of fabric sitting against the chest and belly, which keeps the air moving where the dog needs it most.

The hat: ear holes and the chin drawstring

The hat is shaped to cover the top of the head and the back of the neck, with two openings cut on the sides so the ears sit outside the fabric rather than being folded down inside it. The ear openings are bound or finished so the edge does not fray after washing, and their position is set for the size range so the hat sits correctly on a small dog and on a large one.

The hat is held in place with a drawstring underneath, adjusted with a small cord lock. The cord is kept short, with heat-sealed ends, and the fit is checked so the hat stays on during a walk while the dog can still pant, drink and move its head freely. The cord lock is small and smooth, with no sharp edges.

An elasticated cord or a breakaway fitting can be specified instead of a free drawstring, which is the safer option for dogs that run through brush or play with other dogs. The product page and the care label should recommend checking the hat fit before each walk and supervising the first few wears.

The shirt: shoulder straps and ventilation

The shirt is held on with shoulder straps, which sit over the shoulders and keep the body panel in position without a wide band around the chest. This design is cooler than a full vest because less fabric is in contact with the dog, and it is easier to put on and take off, especially for dogs that dislike being dressed.

Ventilation is built into the body panel in two ways: mesh panels in the areas where heat builds up, and ventilation openings that allow air to pass through the fabric. Together they let hot air escape and cool air reach the coat, which is the difference between a shirt the dog can wear on a summer walk and one that has to come off after ten minutes.

The straps are adjustable enough to fit the size range without being tight, and the ends are finished so they do not rub under the leg or catch on the coat. All the edges are bound or overlocked, so nothing scratches.

The ice pack pocket on the back

The back pocket is designed to hold a gel ice pack. It sits over the back, where a cooling pack has the most contact with the body and where the dog can still lie down comfortably, and it is closed so the pack cannot slide out when the dog walks or rolls.

In use, the owner places a chilled gel pack in the pocket, and the fabric of the pocket keeps the pack off the skin while still transferring the cooling effect. The pocket is sized to the pack dimensions confirmed with the buyer, and the opening can be a simple flap, a zip or hook-and-loop closure, confirmed on the sample.

Cooling products need clear instructions, and the product copy should carry them: use a wrapped or gel pack rather than loose ice, check the dog regularly, remove the pack if the dog seems uncomfortable, and never leave a dog unattended with a cooling product. The shirt supports the dog’s comfort in the heat; it does not replace shade, water and rest.

Heat safety: how owners should use the set

A UV shirt and a cooling pocket help a dog in hot weather, but they are not a substitute for basic heat management. The care instructions and the product page should make four points clear: walk in the cooler parts of the day, provide shade and water, watch for signs of overheating such as heavy panting, drooling or weakness, and remove the set if the dog becomes uncomfortable.

The set is designed for walks, travel, beach days and garden time. It should not be left on a dog that is unattended, and the hat should be removed if the dog tries to chew the cord.

Fit and sizing

Sizing is based on three measurements: back length from the base of the neck to the base of the tail, chest girth at the widest point behind the front legs, and neck girth. Chest girth is the most important for the shirt, and the head circumference is needed for the hat. Because the fabric stretches, a well-cut set has some tolerance, but the measurement should still be taken carefully.

Reference sizes are XS (back 20 cm), S (back 25 cm), M (back 30 cm), L (back 35 cm), XL (back 40 cm), 2XL (back 45 cm) and 3XL (back 50 cm), with chest, neck and head measurements developed to your own chart. Both centimetres and inches should be printed on the size guide.

Fabric and care

The fabric is a lightweight polyester/spandex with a UV-blocking finish, chosen for stretch, quick drying and a cool hand feel. Mesh panels are matched to the body fabric so the set does not look like two different products. Where the market requires it, the fabrics can be tested for UV protection, colourfastness, pH, formaldehyde and azo dyes.

Care is simple: hand wash or use a gentle cycle, air dry flat, do not bleach, do not tumble dry and do not iron the coated fabric or the print. The UV finish is maintained better when the set is washed in cool water and dried out of direct sun.

Customization

Colours: charcoal/grey, lavender and green as shown, or matched to your Pantone reference.

Prints: solid, printed patterns, reflective print and printed logos.

Branding: woven labels, printed labels, hangtags and branded cord ends.

Fit: hat size, ear opening position, strap width and pocket size developed to your measurements.

Packaging: poly bags, header cards, retail boxes and carton markings per your instruction.

Sampling and production timeline

1. Inquiry. Send a photo, a sketch or a tech pack.
2. Fabric. Confirm the fabric, the UV finish, the mesh and the colour, 3–7 days.
3. Pattern. Shirt fit, strap position, hat shape and ear openings, 2–3 days.
4. Sample. First sample as a set, 7–10 working days per round.
5. Approval. Your sign-off on fit, colour, ventilation, pocket and drawcord.
6. Bulk. Production, 25–40 days after approval and deposit.
7. Shipment. Final inspection and packing, then sea, air or express.

Most summer sets are approved in two rounds: the first sample confirms the fit, the straps and the hat shape, and the second confirms the fabric, the colours, the ventilation and the ice pack pocket.

Quality control, stage by stage

• Fabric checked on arrival, including stretch, hand feel and shade.
• Mesh panels and ventilation openings checked during sewing.
• Ear opening position and finish checked on the hat.
• Drawcord length, cord end sealing and the cord lock checked as a safety point.
• Shoulder strap strength and the ice pack pocket checked on the set.
• Measurement, colour and label verification, then needle detection and final inspection.

Minimum order quantity

The MOQ is 100 pieces per colourway, and mixed sizes within one colour are accepted, so a 100-piece order can cover a full size run. Custom dyeing, custom prints or a special UPF finish may require a higher quantity, confirmed at quotation stage.

What we need from you

• A clear photo, a sketch, a sample from another market or a full tech pack.
• Your size chart for the shirt and the hat, or we can develop one for approval.
• Colour references, with Pantone numbers.
• The ice pack dimensions, so the pocket can be cut to fit.
• The UPF rating and testing standard required for your market.
• Label, hangtag and packaging requirements, plus barcode details.

FAQ

What is the MOQ? 100 pieces per colourway, mixed sizes accepted.

How long does sampling take? 7–10 working days per round.

How long is bulk production? 25–40 days after sample approval and deposit.

Does the hat stay on? Yes. It has ear openings and a drawstring with a cord lock underneath.

What is the back pocket for? It holds a gel ice pack, which helps the dog stay comfortable in hot weather.

Does the set replace shade and water? No. It supports the dog in the heat, but owners should still walk in cooler hours and provide shade and water.

Have a tech pack or a photo? Send it over.

We will come back with a sample plan, the MOQ and a quotation for your market. For repeat orders we keep your fabric, colour standard and pattern on record, so the next order starts from the approved sample.